Edimax GP-101ET

 5,650.00

Features:
1Complies with IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) Standards
2Gigabit LAN ports provide high-speed connectivity
3PoE short circuit protection to safeguard network devices
4Extends PoE connection for another 100 meters (328 ft.)
5Reduces installation and equipment costs
6Easy plug-and-play desktop or wall-mounted installation

Product Description

Power over Ethernet (PoE) is typically limited to a range of 100 meters due to cable capacity. For longer-distance PoE networking though, the GP-101ET PoE+ Extender is the perfect accessory – increasing capacity up to another 100 meters (328 ft). It’s a 1-Port Gigabit PoE Extender with plug and play installation requiring neither configuration nor extra electrical power and makes for an innovative and cost-effective PoE repeater that extends power and data for another 100 meters. Extend your network for a PD (Powered Device) such as WLAN access points, network cameras, IP phones and others, with Gigabit high-speed for greater deployment flexibility.

 
IEEE 802.3at/af Power over Ethernet Standard

The GP-101ET Extender can be connected to any IEEE 802.3at/af end-nodes such as WLAN access points, network cameras, Voice over IP (VoIP) telephones and IP-based appliances where the IEEE 802.3at/af inline Power over Ethernet port is supported.

 
Extended Range with Higher Cost Efficiency 

Enables the Ethernet cable to carry both data and power beyond the 100 meters limitation for another 100 meters. This reduces the need for cable installation and eliminates the need for extension cords or electrical outlets on the wall, ceiling or any unreachable place. Overall lower installation costs and simplified deployment efforts.

 
Plug & Play, Easy Installation

No additional power supply or setup required for easy plug & play installation.

 
Reliable & Flexible Power Supply

Featuring PoE short circuit protection to safeguard network devices and protect against damage.

 

101ET_application_diagram

 
Note:
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.

 

HARDWARE
Ports1 Port RJ-45 10/100/1000Base-T Input Port
1 Port RJ-45 10/100/1000Base-T PoE Output Port
LED IndicatorsLink/ACT and PoE
Power InputIEEE 802.3af, IEEE 802.3at
Power Consumption1.2 Watts
Dimensions (L x W x H)86.8 x 79.3 x 25.8 mm
Weight200g
POWER OVER ETHERNET
StandardIEEE802.3af and IEEE802.3at
Power OutputIEEE 802.3af
Pin AssignmentPoE Input Port: 1/2(+), 3/6(-) End-Span; 4/5 (+), 7/8 (-) Mid-Span
PoE Output Port: 1/2(+), 3/6(-) End-Span
PoE Power Output15.4W (IEEE 802.3af)
ENVIRONMENT
TemperatureOperating: 0 ~ 40℃
Storage: -40 ~ 70℃
Humidity (Non-condensing)Operating: 10 ~ 90%
Storage: 5 ~ 90%
STANDARDS COMPLIANCE
StandardsIEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet
IEEE 802.3af Power Over Ethernet (PoE)
IEEE 802.3at Power Over Ethernet Plus (PoE+)
CertificationsFCC, CE

 
HARDWARE INTERFACE

 
Note:
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.



Exclusive Products

Special category of products