Supermicro X10DAL-i


Key Features
1 Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
2 Intel® C612 chipset
3 Up to 1TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 8x DIMM slots
4 2x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 3.0 x4 (in x8),1x PCI-E 2.0 x4 (in x8) slot
5 Dual GbE LAN ports via Intel® i210
6 10x SATA3 (6Gbps) ports w/ Intel C612 controller; RAID 0, 1, 5, 10
7 6x USB 3.0 (4 rear, 2 via header)3x USB 2.0 (2 via header, 1 Type A)
8 7.1 HD Audio with optical S/PDIF
9 Thunderbolt Add-On Card support


Product SKUs  
MBD-X10DAL-i -B: X10DAL-i (Bulk Pack)
MBD-X10DAL-i -O: X10DAL-i (Retail Pack)
Physical Stats  
Form Factor: ATX
Dimensions: 12″ x 10″ (30.5cm x 25.4cm)
CPU: Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP **)

Dual Socket R3 (LGA 2011)

Cores / Cache: Up to 22 Cores† / Up to 55MB† Cache
System Bus: QPI up to 9.6 GT/s
Note: † BIOS version 2.0 or above is required
Note: ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory  
Memory Capacity: 8x 288-pin DDR4 DIMM slots
Memory Type: 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes: RDIMM: 32GB, 16GB, 8GB, 4GB



Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors
On-Board Devices  
Chipset: Intel® C612 chipset
AHCI SATA: SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA: SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers: Dual Gigabit Ethernet LAN ports via Intel® i210

Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Audio: RealTek ALC888 7.1 High Definition Audio with S/PDIF header
Input/ Output  
SATA: 10x SATA3 (6Gbps) ports
LAN: 2x RJ45 Gigabit Ethernet LAN ports
USB: 6x USB 3.0 ports (4 rear + 2 via header)

3x USB 2.0 ports (2 via header + 1 Type A)

Audio: 7.1 HD Audio with optical S/PDIF
Serial Port / Header: 1x COM Port (1 header)
DOM: 2x SuperDOM (Disk on Module) ports
TPM: 1x TPM Header
Chassis (Optimized for X10DAL-i )  
2U Chassis: SC213LT-600LPB
Mid/Mini Tower Chassis: SC732D4-500B
4U / Tower Chassis: SC743T-665B
Important Chassis Notes: To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Expansion Slots  
PCI-Express: 2x PCI-E 3.0 x16

1x PCI-E 3.0 x8 (in x16)

1x PCI-E 3.0 x4 (in x8)

1x PCI-E 2.0 x4 (in x8)

System BIOS  
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: Plug and Play (PnP)
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Software: SuperDoctor® 5
Watch Dog
Power Configurations: ACPI / ACPM Power Management

Power-on mode for AC power recovery

PC Health Monitoring  
Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5 Phase-switching voltage regulator
FAN: 7x 4-pin fan headers (up to 7 fans)
7x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 7x Fan Connectors
Thermal Monitor 2 (TM2) support
LED: CPU / System Overheat LED
Other Features: Chassis intrusion detection
Chassis intrusion header
SDDC Support
Operating Environment  
Operating Temperature Range: 10°C – 35°C (50°F – 95°F)
Non-Operating Temperature Range: -40°C – 70°C (-40°F – 158°F)
Operating Relative Humidity Range: 8% – 90% (non-condensing)
Non-Operating Relative Humidity Range: 5% – 95% (non-condensing)

Exclusive Products

Special category of products