Product SKUs | |
MBD-X10SRi-F -B: | X10SRi-F (Bulk Pack) |
Physical Stats | |
Form Factor: | ATX |
Dimensions: | 12″ x 9.6″, (30.5cm x 24.4cm) |
Processor | |
CPU: | Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v4†/ v3 family (up to 145W TDP **
Single Socket R3 (LGA 2011) |
Core / Cache: | Up to 22 Cores† / Up to 55MB† Cache |
Note: | † BIOS version 2.0 or above is required |
Note: | ** Motherboard supports this maximum TDP. Please verify your system can thermally support
** E5-1600 series CPU does not support LRDIMM type memory |
System Memory | |
Memory Capacity: | 8x 288-pin DDR4 DIMM slots
Up to 1TB ECC 3DS LRDIMM Up to 512GB ECC LRDIMM Up to 256GB ECC RDIMM |
Memory Type: | 2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes: | 3DS LRDIMM: 128GB
LRDIMM: 64GB, 32GB RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage: | 1.2 V |
Error Detection: | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
On-Board Devices | |
Chipset: | Intel C612 chipset |
SATA: | SATA3 (6Gbps) via C612 controller
RAID 0, 1, 5, 10 support |
IPMI: | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
Network Controllers: | Intel® i350-AM2 Dual Port Gigabit Ethernet
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics: | ASPEED AST2400 BMC |
Input/ Output | |
SATA: | 10x SATA3 (6Gbps) ports |
LAN: | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
USB: | 4x USB 3.0 ports (2 rear + 1 via header + 1 Type A)
8x USB 2.0 ports (2 rear + 6 via header) |
Video: | 1x VGA port |
Serial Port / Header: | 1x serial port, 1x header |
SuperDOM: | 2x SuperDOM (Disk on Module) ports with built-in power |
TPM: | 1x TPM Header |
OS Compatibility | • Please reference the OS Compatibility Chart for details |
Chassis (Optimized for X10SRi-F ) | |
1U Chassis: | SC815TQ-563CB
SC813MFTQ-441CB SC813MFTQ-R400CB SC813MFTQ-R606CB |
2U Chassis: | SC213LT-600LPB
SC823TQ-653LPB SC826TQ-R500LPB SC825TQ-563LPB |
3U Chassis: | SC833T-653B
SC836TQ-R500B |
Mid/Mini Tower Chassis: | SC732i-500B |
4U / Tower Chassis: | SC743T-665B
SC842TQ-865B SC842TQ-665B SC842i-500B |
Important Chassis Notes: | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
SuperServer(s) with X10SRi-F | |
Model(s): | SYS-5018R-MR
SYS-5018R-M |
Expansion Slots |
|
PCI-Express: | 1x PCI-E 3.0 x16 slot
1x PCI-E 3.0 x4 (in x8) slot 2x PCI-E 3.0 x8 slots 1x PCI-E 2.0 x4 (in x8) slot 1x PCI-E 2.0 x2 (in x8) slot |
System BIOS | |
BIOS Type: | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features: | Plug and Play (PnP)
APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
Management | |
Software: | Intel® Node Manager
IPMI 2.0 with KVM support SuperDoctor® 5 Watch Dog NMI SPM SUM |
Power Configurations: | ACPI Power Management
Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
PC Health Monitoring | |
Voltage: | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN: | Total of 6 fan headers supporting up to 6 fans
6 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
Temperature: | Monitoring for CPU and chassis environment
CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
LED: | CPU / System Overheat LED
Suspend static indicator LED UID/Remote UID |
Other Features: | Chassis intrusion detection
Chassis intrusion header Chipkill support RoHS, Halogen Free |
Operating Environment | |
Operating Temperature Range: | 0°C ~ 50°C (32°F ~ 122°F) |
Non-Operating Temperature Range: | -40°C ~ 70°C (-40°F ~ 158°F) |
Operating Relative Humidity Range: | 8% ~ 90% (non-condensing) |
Non-Operating Relative Humidity Range: | 5% ~ 95% (non-condensing) |